OFT 50 (MODULES a b c d e f a, L1,L2m,p.v.i) Pressure Jet Boiler Servicing

Domestic light oil firing system installing commissioning, servicing, of pressure jet burners, tanks and boilers and heating systems training and assessment
A five day training and assessment course for candidates wishing to enter the oil industry who want to become OFTEC registered as oil technicians. It covers the regulations and standards that apply to oil fired pressure jet heating installations and installation practice.

It covers the regulations and standards that apply to oil fired tanks, boilers, and burners both the installations and installation practice. Domestic light/commercial oil firing system installation course, and assessment with energy efficiency module. It also covers the regulations and standards that apply to oil fired heating installations and installation practice.

The Training Objectives

Safety requirements -Types of oil firing burners-British Standards and Document L1-Building Regulations- Fuel Feed-Pipework- Flueing and Ventilation-Boiler commissioning-Burner system fault finding-Thermostatic Controls -Insulation -Advanced Energy Efficiency.

Safety requirements-Codes off Practice - Building Regulations and Planning consent-Types of oil and their identification Steel and Thermoplastic oil storage (more than 35001itres)-Constructional Standards-Tank Fittings- Fuel Feed Pipe-work System Design including L1-Thermostatic Controls -Gauges and overfill Alarm-Contamination Problems-Maintenance Safety requirements - Types of oil firing and cooking equipment -Fuel Feed Pipe Work - Flueing and Ventilation Boiler changeovers –

This course is designed for the inexperienced candidate

At the end of the course the successful candidate will be awarded their OFT 50 and will go on to gain the other OFTEC courses with the exception of vaporising cookers

OFT 101 (MODULES a,b,c,d,e,p.) Pressure Jet Boiler Servicing

Domestic light/commercial oil firing system commissioning, servicing and assessment of pressure jet burners training and assessment
A two day training and assessment course for experienced installers who want to become OFTEC registered as service technicians of pressure jet appliances. It covers the regulations and standards that apply to oil fired pressure jet heating installations and installation practice. The OFTEC registration is as a Domestic Light/commercial Oil Firing System Servicing Technician of Pressure Jet Burners designed for the experienced technician.

The Training Objectives

Safety requirements -Types of oil firing burners-British Standards and Document L1-Building Regulations- Fuel Feed-Pipe-work- Flueing and Ventilation-Boiler commissioning-Burner system fault finding-Thermostatic Controls -Insulation -Advanced Energy Efficiency.

Assessment

A Two day OFTEC training and assessment. For experienced technicians the assessment can be taken without the training.

OFT 102 (MODULES a,b,c,d,e,v) Vaporisina Boiler Servicing

Domestic light/commercial oil firing system commissioning, servicing and assessment of vaporising burners training and assessment.
A two day training and assessment course of experienced installers who want to become OFTEC registered as service technicians of vaporising appliances. It covers the regulations and standards that apply to oil fired vaporising heating installations and installation practice. The OFTEC registration is as a Domestic Light/Commercial Oil Firing System Servicing Technician of Vaporising Burners designed for the experienced technician.

The Training Objectives

Safety requirements - Types of oil firing and cooking equipment - oil storage
(less than 3500 litres), Fuel Feed Pipe Work - Flueing and Ventilation Boiler
changeovers - Heating System Design including L1 Thermostatic Controls -
Insulation - Advanced Energy Efficiency.

Certification

On successful completion of the assessment, a certificate of competence is issued by the certification body. This then enables the Technician to apply for OFTEC registration as a serving technician of vaporising burners.

Where a combination of courses are taken at the same time the use of modules means that the time taken is reduced i.e l 05E+600a = 2 days rather than 3

OFT 105E (MODULES a,b,c,d,e,f,g,m.) Boiler Installing

Domestic light/commercial oil firing system installation course, and assessment with energy efficiency module.

A two day training and assessment course for experienced installers who want to
become OFTEC registered as installation technicians. It covers the regulations and standards that apply to oil fired heating installations and installation practice. The OFTEC registration is as a Domestic Light/commercial Oil Firing System Installation Technician.

The Training Objectives

Safety requirements -Types of oil firing and cooking equipment- oil storage (less than 35001itres) Fuel Feed-Pipe-work- Flueing and Ventilation-Boiler changeovers - Heating System Design including L1-Thermostatic Controls -Insulation -Advanced Energy Efficiency.

Assessment

A day OFTEC assessment. For experienced technicians the assessment can be taken without the training.

Certification

On successful completion of the assessment, a certificate of competence is issued by the certification body. This then enables the Technician to apply for OFTEC registration

OFT 600A (MODULES a,b,L1 andL2.)

Domestic light/commercial oil Storage Tank Installation course, and assessment.
A one day training and assessment covering the installation and maintenance of oil storage tanks in the Domestic/Light Commercial sector. The course for experienced installers who want to become OFTEC registered as specialists in tank installation. It covers the regulations and standards that apply to oil fired tanks, the installations and installation practice. The OFTEC registration is as a Domestic Light/Commercial Oil Firing Tank Installation Technician.

The Training Objectives

Safety requirements-Codes off Practice - Building Regulations and Planning consent-Types of oil and their identification-Steel and Thermoplastic oil storage (more than 35001itres)-Constructional Standards-Tank Fittings- Fuel Feed Pipework- System Design including L1-Thermostatic Controls -Gauges and overfill Alarm-Contamination Problems-Maintenance

Assessment

A half-day OFTEC assessment. For experienced technicians the assessment can be taken without the training.

Certification

On successful completion of the assessment, a certificate of competence is issued by the certification body. This then enables the Technician to apply for OFTEC registration.

OFT 800 (MODULES cd dd ed fd.)

Domestic light/commercial oil Storage Delivery course, and assessment for tanker drivers. A one day training and assessment covering the delivery of oil to storage tanks in the Domestic/Light Commercial sector. The course for experienced tanker drivers who want to become OFTEC registered as specialists in oil delivery. It covers the regulations and standards that apply to oil fired tanks, the installations and installation practice. The OFTEC registration is as a Domestic Light/Commercial Oil Firing Tank Delivery Technician.

The Training Objectives

Safety requirements-Codes off Practice - Building Regulations and Planning consent-Types of oil and their identification-Steel and Thermoplastic oil storage (more than 35001itres)-Constructional Standards-Tank Fittings- Fuel Feed Pipework- System Design including L1-Thermostatic Controls -Gauges and overfill Alarm-Contamination Problems-Maintenance

Assessment

A half-day OFTEC assessment. For experienced delivery technicians the assessment can be taken without the training.

Certification

On successful completion of the assessment, a certificate of competence is issued by the certification body. This then enables the Technician to apply for OFTEC registration.

Where a combination of courses are taken at the same time the use of modules means that the time taken is reduced i.e l 05E+600a = 2 days rather than three

Pressure Jet Boiler Servicing

Domestic light/commercial oil firing system commissioning, servicing and assessment of pressure jet burners

A day training course for installers who want to improve their knowledge on
pressure jet appliances. It covers the fault finding on boilers the regulations and standards that apply to oil fired pressure jet heating installations and installation practice.

The Training Objectives

Safety requirements -Types of oil firing burners-British Standards and Document L1-Building Regulations- Fuel Feed-Pipe-work- Flueing and Ventilation-Boiler commissioning-Burner system fault finding-Thermostatic Controls -.
Included is a disc of manufacturers instructions and fault finding guides to help the operative is his every day work.

Commercial Pressure Jet Boiler course

commercial oil firing system commissioning, servicing and assessment of pressure jet burners training and assessment

A day training course for installers who want to improve their knowledge on commercial pressure jet appliances. It covers the fault finding on boilers the regulations and standards that apply to oil fired pressure jet heating installations and installation practice.

The Training Objectives

Safety requirements -Types of oil firing burners-British Standards and Document L1-Building Regulations- Fuel Feed-Pipe-work- Flueing and Ventilation-Boiler commissioning-Burner system fault finding-Thermostatic Controls -.
Included is a disc of manufacturers instructions and fault finding guides to help the operative is his every day work.